PUC MEASUREMENT SYSTEM WITH INFORMATION PORTAL USING GSM AND RFID

Authors

  • Prof. M. P. Mahajan1, Divyank Sunil Deshpande2, Ganesh Ramdas Chavan 3 Department of Electronics and Telecommunication Engineering, Savitribai Phule Pune University, Sandip Institute of Technology and Research Centre, Nashik

Abstract

PUC Measurement system is used to check Concentration of Carbon mono-oxide in vehicle. When person visit PUC center to gen PUC certificate, he has to check concentration of CO in vehicle. First he swap RFID card in front of RFID reader, this 12 digit unique code along with concentration of CO in % is sent to RTO office using GSM modem. GSM modem connected to central PC station receives this SMS. Vehicle information is saved in access database against unique RFID card. If concentration exceed above limit auto SMS will be send to PUC center that servicing required for vehicle. Do not allow to PUC certificate. In this line of thought, the proposed PUC measurement system is implemented using PIC16F877A micro-controller using GSM & RFID. Key Words: MQ 7 Sensor, GSM Module, RFID Techniques

Downloads

Published

2016-04-28

How to Cite

Deshpande2, Ganesh Ramdas Chavan 3, P. M. P. M. D. S. (2016). PUC MEASUREMENT SYSTEM WITH INFORMATION PORTAL USING GSM AND RFID. International Journal of Engineering Technology and Computer Research, 4(2). Retrieved from https://www.ijetcr.org/index.php/ijetcr/article/view/299

Issue

Vol. 4 No. 2 (2016)

Section

Articles

License

Creative Commons LicenseInternational Journal of Engineering Technology and Computer Research (IJETCR) by Articles is licensed under a Creative Commons Attribution 4.0 International License.